scroll up and down, left and right, etc.) and multi-language support (i.e. Two-line graphic LCD with interactive operability (i.e.Built-in anti-collision feature (only one tag is accessed at any time).Support for ISO 14443 Part 4 Type A and B cards, Mifare, FeliCa and all four types of NFC (ISO/IEC 18092) tags.Does anyone know a wireless NFC reader (bluetooth. Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type) Beside currently working on integrating the Zipato RFID Keypad into HA, Id also like to use NFC tags.Moreover its three built-in SAM slots provide enhanced security during contactless operations The 2-line graphic LCD has multiple language support and allows interactive operation such as scrolling up and down, left and right, etc. It is equipped with 4 LEDs, a buzzer and an LCD. With its PC/SC compliance, ACR1222L ensures easy upgrade of PC/SC smart card applications. ACR1222L is developed for ISO14443 Type A and B cards, Mifare, FeliCa and all 4 types of NFC tags. It supports ISO14443 Type A and B cards, Mifare, FeliCa and all 4 types of NFC tags.ĪCR1222L is an LCD-equipped PC-Linked NFC Contactless Reader with USB. ACR1222L is a NFC Contactless USB Reader with LCD. After the initialization is completed, the card swiping function of NFC can be used. The frequency band used in the code is AS923.The NFC chip initialization code adopts the IIC communication protocol. Users need to modify this macro definition according to their frequency band and network access parameters. This function initializes all parameters of the protocol stack. It supports LoRa® and Bluetooth communication modes. This product can be used in Windows thin client terminals and fat client terminals. The MCU selects RAK4631 WisBlock Core module, which adopts the Nordic nRF52840 MCU, supports Bluetooth 5.0 (Bluetooth low energy consumption) and the latest LoRa® transceiver SX1262 from Semtech company. The RC-S380/S is an NFC capable reader which can be connected to a PC via USB port. The main hardware of this project uses WisBlock kit. When the card reader reads the electronic tag data, the electronic tag information will be automatically uploaded to the LoRaWAN® built-in server of RAK7268 WisGate Edge Lite 2. NFC works similarly to RFID, although NFC has a much shorter range than RFID. NFC is a set of standards that allow smartphones and other devices to communicate via radio signals when they are held in close proximity. The main idea of this project is to build a wireless card reader that supports LoRaWAN® through WisBlock. What Is NFC NFC stands for Near Field Communication. It is battery powered, and can be used for more than half a year. The card reader with LoRaWAN® wireless transmission is easy to install and deploy. The data transmission volume of NFC is also relatively small, which is very suitable for LoRaWAN® transmission mode. Therefore, the use of LoRaWAN® can make up for the shortcomings of the above two wireless devices. LoRaWAN® is characterized by long transmission distance, low reception sensitivity and low power consumption. At present, common NFC wireless card readers in the market are based on WiFi or Bluetooth, with high power consumption and limited wireless transmission distance.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |